NEC NP901W user manual About Direct Power Off

2. Installation and Connections

Connecting the Supplied Power Cable

Connect the supplied power cable to the projector.

First connect the supplied power cable’s three-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cable in the wall outlet.

US

B(

LAN)

WIRELES

WIRELESS

			SELECT
			3DR
			EFORM	AUTO
				ADJUST
				SOURCE
						USB
USB						LAMP
S-						STATUS
VIDEOIN
	AUD		LAN
	IOIN
VIDEO			COOMP
			C
IN	L/		MPOUTE
	MONO		NENTR/
	AUDI	R	1IN
	OIN			AUDIOIN
			MONITOR		COOMP
	L/
			OUT		C
	MONO				MPOUTE
					NENTR/	HDMI
		R		AUDIO	2IN
						IN
				OUT		AUDIO
					PC
						IN
					CONTROL

ACIN

To wall outlet

Make sure that the prongs are fully inserted into both the AC IN and the wall outlet.

About Direct Power Off

The projector has a feature called “Direct Power Off”. This feature allows the projector to be turned off (even when projecting an image) using a power strip equipped with a switch and a breaker.

CAUTION:

Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated while the projector is turned on and immediately after the projector is turned off.

CAUTION:

Do not unplug the power cable from the wall outlet or projector when the projector is powered on. Doing so can cause damage to the AC IN connector of the projector and (or) the prong plug of the power cable.

TIP: To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch and a breaker.

TIP: The projector can be unplugged during its cool down period after it is turned off.

21