Remote Control
qPOWER ON/STANDBY Switches the power on/standby.
(This does not operate when the POWER/STANDBY indicator of the plasma is off.)
wRGB/PC
Press this button to select RGB/PC as the source. RGB/PC can also be selected using the INPUT SELECT button on the monitor.
eDVD / HD
Press this button to select DVD/HD as the source. DVD/HD can also be selected using the INPUT SELECT button on the monitor.
rVIDEO
Press this button to select VIDEO as the source.
→VIDEO1 → VIDEO2 → VIDEO3
VIDEO can also be selected using the INPUT SELECT button on the monitor.
tMENU/ENTER
Press this button to access the OSM controls.
Press this button during the display of the main menu to go to the sub menu.
yCURSOR (▲ / ▼ / / )
Use these buttons to select items or settings and to adjust settings or switch the display patterns.
uEXIT
Press this button to exit the OSM controls in the main menu. Press this button during the display of the sub menu to return to the previous menu.
iPOINTER
Press this button to display the pointer.
oZOOM
Enlarges or reduces the image.
!0VOLUME
Adjusts the audio volume.
!1MUTE
Mutes the audio.
!2WIDE
Automatically detects the signal and sets the aspect ratio. Wide button is not active for all signals.
!3DISPLAY
Displays the source settings on the screen.
!4OFF TIMER
Activates the off timer for the unit.
!5SIDE BY SIDE
Press this button to show a couple of pictures in the
!6PICTURE IN PICTURE
Press this button to show a couple of pictures in the
!7SINGLE
Cancels the split screen mode.
!8SELECT/FREEZE
Press this button to select the active picture in a split screen mode.
When the PIC FREEZE function is operating, this button can be used to display still images on the sub screen.
!9AUTO ADJUST
Press this button to adjust Fine Picture, Picture ADJ, Position, and Contrast automatically. Press the button in video mode and the Auto Adjust switches to ZOOM mode automatically when a letter box image is displayed.
@0ID SELECT
Set the ID number in the remote control. The remote control can then be used only for a display with the same ID number. When several displays are used together they can be controlled individually.
@1CLEAR/SEAMLESS SW
Clears the number set by the ID SELECT button. When the SEAMLESS SW function is operating, this button can be used to switch the input source quickly.
@2Remote control signal transmitter
Transmits the remote control signals.
@3Remote Jack
Insert the plug of the remote cable (The 1/8 Stereo Mini cable) here when using the supplied remote control in the wired condition.
Downloaded From |
