Picture Settings Menu
Adjusting the picture
The contrast, brightness, sharpness, color and tint can be adjusted as desired.
Example: Adjusting the contrast
On “CONTRAST” of “PICTURE” menu, adjust the contrast.
PICTURE | 1 / 2 | ||||||
CONTRAST |
|
|
|
|
|
| : 52 |
BRIGHTNESS |
|
|
|
|
|
| : 32 |
|
|
|
|
|
| ||
SHARPNESS |
|
|
|
|
|
| |
|
|
|
|
|
| : 16 | |
|
|
|
|
| |||
COLOR |
|
|
|
|
|
| |
|
|
|
|
|
| : 32 | |
|
|
|
|
| |||
TINT |
|
|
|
| G : 32 | ||
R |
|
|
|
|
| ||
|
|
|
| ||||
|
|
|
|
|
|
| |
PICTURE MODE | : |
|
| NORMAL | |||
NR | : |
|
| OFF |
NEXT PAGE |
|
|
|
|
| |
SEL. | ADJ. | EXIT RETURN | CONTRAST |
|
| : 52 |
|
|
|
|
|
Note: If “CAN NOT ADJUST” appears ...
When trying to enter the PICTURE submenu, make sure PICTURE MODE is not set to DEFAULT.
Information
Picture adjustment screen CONTRAST: Changes the picture’s white level. BRIGHTNESS: Changes the picture’s black level. SHARPNESS: Changes the picture’s sharpness. Adjusts picture detail of VIDEO display.
COLOR: Changes the color density.
TINT: Changes the picture’s tint. Adjust for natural colored skin, background, etc.
Adjusting the computer image
Only the contrast and brightness can be adjusted when a computer signal is connected.
Restoring the factory default settings
Select “DEFAULT” under the “PICTURE MODE” settings.
Setting the picture mode according to the brightness of the room
There are four picture modes that can be used effectively according to the environment in which you are viewing the display.
Example: Setting the “THEAT. 1” mode
On “PICTURE MODE” of “PICTURE” menu, select “THEAT. 1”.
| PICTURE |
|
|
| 1 / 2 |
|
| |
CONTRAST |
|
|
|
|
| : 52 |
|
|
BRIGHTNESS |
|
|
|
| : 32 |
|
| |
SHARPNESS |
|
|
|
| : 16 |
|
| |
COLOR |
|
|
|
|
| : 32 |
|
|
TINT |
| R |
|
|
| G : 32 |
|
|
PICTURE MODE | : | NORMAL |
|
|
| |||
NR |
| : | OFF |
|
|
| ||
NEXT PAGE |
|
|
|
|
|
|
| |
SEL. | ADJ. |
| EXIT RETURN |
| PICTURE MODE | : THEAT. 1 | ||
|
|
|
|
|
|
|
Information
Types of picture modes
THEAT. 1, 2: Set this mode when watching video in a dark room.
This mode provides darker, finer pictures, like the screen in movie theaters.
For a darker image, select THEAT. 2.
NORMAL: Set this mode when watching video in a bright room.
This mode provides dynamic pictures with distinct differences between light and dark sections. BRIGHT: This mode provides brighter pictures than
NORMAL.
DEFAULT: Use this to reset the picture to the factory default settings.
Reducing noise in the picture
Use these settings if the picture has noise due to poor reception or when playing video tapes on which the picture quality is poor.
Example: Setting “NR-3”
On “NR” of “PICTURE” menu, select “NR-3”.
| PICTURE |
|
|
| 1 / 2 |
|
| |
CONTRAST |
|
|
|
|
| : 52 |
|
|
BRIGHTNESS |
|
|
|
| : 32 |
|
| |
SHARPNESS |
|
|
|
| : 16 |
|
| |
COLOR |
|
|
|
|
| : 32 |
|
|
TINT |
| R |
|
|
| G : 32 |
|
|
PICTURE MODE | : | NORMAL |
|
|
| |||
NR |
| : | OFF |
|
|
| ||
NEXT PAGE |
|
|
|
|
|
|
| |
SEL. | ADJ. |
| EXIT RETURN |
| NR | : NR - 3 | ||
|
|
|
|
|
|
|
Information
NR
*“NR” stands for Noise Reduction.
*This function reduces noise in the picture.
Types of noise reduction
There are three types of noise reduction. Each has a different level of noise reduction.
The effect becomes stronger as the number increases
(in the order
Setting the color temperature
Use this procedure to set color tone produced by the plasma display.
Example: Setting “HIGH”
On “COLOR TEMP.” of “PICTURE” menu, select “HIGH”.
| PICTURE | 2 / 2 | |
PREVIOUS PAGE |
|
| |
COLOR TEMP. | : | HIGH | |
GAMMA |
| : | 2 |
LOW TONE |
| : | AUTO |
COLOR TUNE |
|
| |
|
|
|
|
SEL. | ADJ. |
| EXIT RETURN |
Information
Setting the color temperature LOW: More red
MID LOW: Slightly red
MID: Standard (slightly bluer)
HIGH: More blue
Downloaded From |