•Press and hold the POWER ON button, and release the button when the indication saying that the code is set is displayed. Or, press and hold the POWER STANDBY button, and release the button when the power is turned off.
Information
⬛REMOTE ID setting
ALL: The remote code is not set.
1 to 4: The specified remote code is applied.
ID number setting
When using more than one of these displays, this function sets ID numbers so that operation of the remote control does not cause multiple monitors to operate at the same time.
Example: Setting “2”
On “ID NUMBER” of “OPTION3” menu, select “2”.
| OPTION 3 | 3 / 4 | |
PREVIOUS PAGE |
|
| |
TIMER |
|
|
|
PWR . ON MODE |
|
| |
CONTROL LOCK | : | OFF | |
IR REMOTE |
| : | ON |
LOOP OUT |
| : | OFF |
REMOTE ID |
| : | ALL |
ID NUMBER |
| : | 2 |
VIDEO WALL |
|
| |
NEXT PAGE |
|
| |
SEL. | ADJ. |
| EXIT RETURN |
*To reset back to ALL
Press the CLEAR/SEAMLESS SW button
Information
⬛ID NUMBER settings
ALL: ID NUMBER will not be set.
1 to 256: ID NUMBER will be set.
⬛When the ID NUMBER have been set
You can also set ID NUMBER for each remote control to operate the plasma display individually. To do so, see the following explanation.
Note: A contingency method of shutting off the electric power should be used in cases of emergency during video wall setup.
DIVIDER
Set the (2⋅ 2) video wall.
Example: Setting “4”
On “DIVIDER” of “VIDEO WALL” menu, select “4”.
VIDEO WALL
DIVIDER |
| : | 4 |
POSITION |
|
|
|
DISP. MODE | : | SPLIT | |
AUTO ID |
| : | OFF |
IMAGE ADJUST |
|
| |
P. ON DELAY | : | OFF | |
PLE LINK |
| : | OFF |
REPEAT TIMER | : | OFF | |
SEL. | ADJ. |
| EXIT RETURN |
Information
⬛DIVIDER settings
OFF, 1: 1 Screen (Matrix display function does not work)
4:4 Screens (2⋅ 2 video wall)
9:9 Screens (3⋅ 3 video wall)
16:16 Screens (4⋅ 4 video wall)
25:25 Screens (5⋅ 5 video wall)
*When selecting a 2⋅ 2, 3⋅ 3, 4⋅ 4, 5⋅ 5 VIDEO WALL POSITION.
VIDEO WALL POSITION
Set the position of each display.
Example: Setting “4”
On “VIDEO WALL” menu, select “POSITION”, then press the MENU/ENTER button.
The “VIDEO WALL POSITION” screen appears. Select “NO. 4” of “POSITION NO.”.
To set the ID number for the remote control
Example: Setting “2”
Press the ID SELECT button on the remote control.
The “ID SELECT” screen appears.
On “ID NUMBER” of “ID SELECT” menu, select “2”.
| ID SELECT | |
| POSITION : | 1 |
ID NUMBER | : | 2 |
| ADJ. | EXIT RETURN |
*To reset back to ALL
Press the CLEAR/SEAMLESS SW button
Video Wall setting
Use this feature to configure a (2×2, 3×3, 4×4, 5×5) video wall.
On “OPTION3” menu, select “VIDEO WALL”, then press the MENU/ENTER button.
The “VIDEO WALL” screen appears.
| VIDEO WALL |
|
| ||
DIVIDER |
| : | OFF |
| |
POSITION |
|
|
|
|
|
DISP. MODE | : | SPLIT |
| ||
AUTO ID |
| : | OFF |
| |
IMAGE ADJUST |
|
|
|
| |
P. ON DELAY | : | OFF |
| ||
PLE LINK |
| : | OFF |
| |
REPEAT TIMER | : | OFF | |||
Downloaded From | RETURN | ||||
SEL. | ADJ. |
| EXIT |
| |
VIDEO WALL POSITION
POSITION NO . 
4 
ADJ. | EXIT RETURN |
Information
⬛VIDEO WALL POSITION settings
1 | Screen: There is no need to set POSITION. |
| |||||
4 | Screens |
|
| 9 Screens |
| ||
|
|
|
|
|
|
|
|
| NO. 1 | NO. 2 |
| NO. 7 | NO. 8 |
| NO. 9 |
|
|
|
|
|
| ||
|
|
|
| NO. 10 | NO. 11 |
| NO. 12 |
| NO. 4 | NO. 3 | |||||
|
|
|
|
|
| ||
|
| NO. 13 | NO. 14 |
| NO. 15 | ||
|
|
|
|
| |||
|
|
|
|
|
|
|
|
16 Screens |
| 25 Screens |
|
| ||||||
NO. 16 | NO. 17 | NO. 18 | NO. 19 |
| NO. 32 | NO. 33 | NO. 34 | NO. 35 | NO. 36 | |
|
|
|
|
| NO. 37 | NO. 38 | NO. 39 | NO. 40 | NO. 41 | |
NO. 20 | NO. 21 | NO. 22 | NO. 23 |
| ||||||
|
|
|
|
|
| |||||
| NO. 42 | NO. 43 | NO. 44 | NO. 45 | NO.46 | |||||
|
|
|
|
| ||||||
NO. 24 | NO. 25 | NO. 26 | NO. 27 | |||||||
|
|
|
|
|
| |||||
| NO. 47 | NO. 48 | NO. 49 | NO. 50 | NO. 51 | |||||
|
|
|
|
| ||||||
NO. 28 | NO. 29 | NO. 30 | NO. 31 |
|
|
|
|
|
| |
| NO. 52 | NO. 53 | NO. 54 | NO. 55 | NO. 56 | |||||
|
|
|
|
|
|
|
|
|
| |
