ORBITER
Use this to set the picture shift.
Example: Setting “ORBITER” to “AUTO2”
On “ORBITER” of “LONG LIFE” menu, select “AUTO2”.
LONG LIFE
PLE |
| : | AUTO |
ORBITER |
| : | AUTO2 |
INVERSE |
| : | OFF |
SCREEN WIPER | : | OFF | |
SOFT FOCUS | : | OFF | |
|
|
|
|
SEL. | ADJ. |
| EXIT RETURN |
INVERSE
Use this to set the inverse mode or to display a white screen.
Example: Setting “INVERSE” to “WHITE”
On “INVERSE” of “LONG LIFE” menu, select “WHITE”.
LONG LIFE
PLE |
| : | AUTO |
ORBITER |
| : | AUTO1 |
INVERSE |
| : | WHITE |
SCREEN WIPER | : | OFF | |
SOFT FOCUS | : | OFF | |
SEL. | ADJ. |
| EXIT RETURN |
Information
⬛ORBITER settings
OFF: Orbiter mode does not function.
This is the default setting when RGB is input. AUTO1: The picture moves around the screen intermittently, making the picture smaller. This is the default setting when a Video or a DVD/HD/DTV signal is input. Set to “OFF” when these signals are not used. AUTO2: The picture moves around the screen intermittently, making the picture bigger.
MANUAL: User can adjust the orbiter function (Horizontal Dot, Vertical Line and Time) manually. See the following explanation.
*When a Video or a DVD/HD/DTV signal is input, the AUTO1 and 2 functions will affect only the moving picture and will not make the screen smaller or bigger.
Adjust the ORBITER function manually
Set the amount of shift and the time between movement.
Example: Setting so that the picture moves 2 dots horizontally and 4 lines vertically every 3 minutes.
Information
⬛INVERSE Settings
ON: The picture is displayed alternately between positive image and negative image.
You can set the time by pressing the MENU/ENTER button while “ON” is set.
OFF: Inverse mode does not function.
WHITE: The entire screen turns white.
You can set the time by pressing the MENU/ENTER button while “ON” is set.
Setting the time for INVERSE/WHITE
Set a time duration.
Example: Setting to that the INVERSE mode starts in 2 hours and proceeds for one hour and a half.
On “INVERSE” of “LONG LIFE” menu, select “ON”, then press the MENU/ENTER button.
THE “INVERSE/WHITE” screen appears. Adjust the times.
On “ORBITER” of “LONG LIFE” menu, select “MANUAL”, then press the MENU/ENTER button.
THE “ORBITER” screen appears. Adjust the items.
ORBITER
H - DOT |
| : | 2 DOT |
V- LINE |
| : | 4 LINE |
TIME |
| : | 3 M |
|
|
|
|
SEL. | ADJ. |
| EXIT RETURN |
Information
⬛ORBITER Function settings
TIME: Interval of 1~5 minutes (1 horizontal dot or 1 vertical line per interval).
Downloaded From |
INVERSE/WHITE
WORKING TIME | : | 01H30M | |
WAITING TIME | : | 02H00M | |
|
|
|
|
SEL. | ADJ. |
| EXIT RETURN |
Information
⬛Setting the time
WORKING TIME: Set the time duration for “INVERSE/WHITE”.
When the WORKING TIME is set to “ON” the mode will stay on.
WAITING TIME: Set the standby time until the “INVERSE/WHITE” mode starts.
*The “WAITING TIME” can not be set when the “WORKING TIME” is ON.
*THE “WORKING TIME” and “WAITING TIME” can be set for up to 12 hours and 45 minutes in units of 3 minutes.
*Ending a WORKING TIME function, the monitor will
go to STAND BY. [Example]
WORKING TIME: 01H30M
WAITING TIME: 02H00M
| ←−−−− | 2 H | −−−−→←−− |
| 1.5 H −−→←−−−− |
|
|
|
|
| |||||
Start |
|
| INVERSE/WHITE Start STAND BY |
⬛To select “ON” for the “WORKING TIME”...
Set the hours of the working time to 0H and the minutes to 0M. “ON” will be displayed.