6. Using On-Screen Menu

4.Select [OK] and press the ENTER button. This will complete the settings.

You will be returned to the [PROGRAM LIST] screen.

NOTE:

•Up to 30 different timer settings can be programmed.

•When [PROGRAM TIMER] is turned on, the [STANDBY MODE] setting is ignored.

•The Program Timer is executed on a set time basis, not in a program basis.

•Once the program not marked with a check in [REPEAT] has been executed, the check mark in the [ACTIVE] check box will be cleared automatically and the program will be disabled.

•When the on-time and the off-time set for the same time, the off-time setting will take preference.

•Two different sources are set for the same time, the larger program number will take preference.

•The on-time setting will not be executed while the cooling fans are running or an error is occurring.

•If the off-time setting is expired under the condition in which the power off is not possible, the off-timer setting will not be ex- ecuted until the power off becomes possible.

•Programs not marked with a check mark in [ACTIVE] of the [EDIT] screen will not be executed even if the Program Timer is en- abled.

•When the projector is turned on by using the program timer and if you want to turn off the projector, set the off-time or do it manually so as not to leave the projector on for a long period of time.

Activating the program timer

1.Select [ON] on the [PROGRAM TIMER] screen and press the ENTER button. The [ON] will be activated.

2.Press the EXIT button.

The [PROGRAM TIMER] screen will be changed to the [TOOL] screen.

NOTE:

•Selecting [OFF] will disable the Program Timer even when a program is marked with a check mark on [PROGRAM LIST]screen.

•When the [ON] is turned on, the [PROGRAM LIST] cannot be edited. To edit the programs, select [OFF] to turn off the Program Timer.

Changing the programmed settings

1.On the [PROGRAM LIST] screen, select a program you want to edit and press the ENTER button.

2.Change the settings on the [EDIT] screen.

3.Select [OK] and press the ENTER button. The programmed settings will be changed.

You will be returned to the [PROGRAM LIST] screen.

Changing the order of programs

1.On the [PROGRAM LIST] screen, select a program whose order you want to change and press the SE- LECT button.

2.Press the SELECT button to select G or .

3.Press the ENTER button a few times to select a row to which you wish to move the program.

The order of the programs will be changed.

89