6. Using On-Screen Menu

Selecting Communication Speed [Communication Speed]

This feature sets the baud rate of the PC Control port (D-Sub 9 Pin). It supports data rates from 4800 to 38400 bps. The default is 38400 bps. Select the appropriate baud rate for your equipment to be connected (depending on the equipment, a lower baud rate may be recommended for long cable runs).

Your selected communication speed will not be affected even when [Reset] is done from the menu.

Setting Security [SECURITY SETTINGS]

Disabling the Cabinet Buttons [Control Panel Lock]

This option turns on or off the Control Panel Lock function.

NOTE:

•This Control Panel Lock does not affect the remote control functions.

•When the control panel is locked, pressing and holding the EXIT button on the projector cabinet for about 10 seconds will change the setting to [Off].

Setting a Password [BACKGROUND Lock]

A password can be set for your projector to avoid operation by an unauthorized person.

When [BACKGROUND Lock] is set, changing the background data in the USB memory will display the Password input screen.

NOTE: When [BACKGROUND LOCK] is turned on, [BACKGROUND] cannot be selected from the menu.

[Entry]

To assign your password:

NOTE: Up to 10 alphanumeric characters can be assigned.

1.Type a password.

Select the [ENTER PASSWORD] entry box and press the ENTER button. (→ page 68)

An asterisk will be displayed.

101