6. Using On-Screen Menu

INSTALLATION(2)

[NETWORK SETTINGS]

This feature allows you to set various setting items when the projector is used on your network.

CAUTION

• Consult with your network administrator about these settings.

Hints on How to Set Up LAN Connection

To configure the projector to communicate on the network using the LAN port (RJ-45):

1.Select the [WIRED] tab for the LAN port (RJ-45).

2.On the [WIRED] tab, select a number from the [Profiles] list for your LAN settings. Two settings can be stored in memory for the LAN port.

3.On the [WIRED] tab, turn on or off [DHCP], specify IP address, Subnet Mask, Gateway and DNS Con- figuration. Select [OK] and press the ENTER button.

(→ page 98)

To recall the settings from memory:

After selecting the [WIRED] tab, select the number from the [Profiles] list.

Select [OK] and press the ENTER button. (→ page 98)

To connect a DHCP server:

On the [WIRED] tab, select [DHCP] and press the ENTER button. A check mark will be placed. Select again and press the ENTER button. The check box will be cleared.

When setting an IP address without using a DHCP server, clear the check box for [DHCP]. (→ page 98)

95