6. Using On-Screen Menu

[Entry List]

Using the Entry List

When any source adjustments are made, the adjustments are automatically registered in the Entry List. The (adjust- ment values of) registered signals can be loaded from the Entry List whenever necessary.

However, only up to 100 patterns can be registered in the Entry List. When 100 patterns have been registered in the Entry List, an error message is then displayed and no additional patterns can be registered. You should thus delete (adjustment values of) signals that are no longer needed.

Entering the Currently Projected Signal into the Entry List

1.Display the Entry List.

2.Use the SELECT or button on your remote control or the projector cabinet to select any number.

3.Use the SELECT button to select [Store] and press the ENTER button.

You can edit signals on the [Entry List].

Load......................

Enables you to select a signal from the list.

Store....................

Enables you to store the currently projected signal.

Cut........................

Enables you to remove a selected signal from the list and place it on the “clipboard” in the projector.

Copy......................

Enables you to copy a selected signal from the list and place it on the “clipboard” in the projector.

Paste....................

Enables you to paste the signal placed on the “clipboard” to any other line of the list.

Edit.......................

Enables you to change SOURCE NAME, INPUT TERMINAL, LOCK, and SKIP.

73