NEC XT9000 Set up the projector, Turn on the projector 2. Select your type of projection, Test

Set up the projector

1.Turn on the projector

2.Select your type of projection:

Desktop front, ceiling rear, desktop rear, and ceiling front.

3.Display the test pattern by pressing the TEST button on the re- mote control or using the menu.

TEST

(2)Press and hold the CTL and press the ZOOM + or - button to adjust the image size optically. You can also adjust the image size by using the ZOOM + or - button on the projector cabinet.

The zoom function processes a signal digitally. For this reason, the zoom buttons on the remote control and the projector cabinet are not available for HDTV, Video, S-Video, and SDI signals.

FOCUS + MAGNIFY/ ZOOM +

CTL - -

4.Adjust the image position and the image size.

(1)Press and hold the CTL button and press the POSITION button to display the Lens Shift adjustment screen.

Use the Select button on the remote control or the LENS SHIFT button on the projector cabinet to move the image horizontally and vertically.

To close the Lens Shift adjustment screen, press the CANCEL button. See page E-9 for “Lens Shift Adjustable Range”.

POSI/ LENS

CTL

(3)Press and hold the CTL button and press the FOCUS + or - button to obtain the best focus optically. You can also adjust the focus by using the FOCUS + or - button on the projector cabinet.

FOCUS + MAGNIFY/ ZOOM +

CTL - -

ENTER

E – 12