Manuals / NEC / Computer Equipment / Projector

NEC XT9000 user manual Optional Accessories, REMOTE 3 XLR Pin Assignments and Signals, Outin

Models: XT9000

1 54

Download 54 pages 43.62 Kb

Page 49

7. Optional Accessories

7. Optional Accessories

Lens

TL-08SF (Short Focal Lens 0.84) : 10kg

TL-1ZH (Zoom Lens 1.5 - 2.5:1) : 5.5kg

TL-2Z (Zoom Lens 2.5 - 4.0:1) : 4.5kg

TL-4Z (Zoom Lens 4.0 - 7.0:1) : 4.5kg

Interface Board

XT SDI BOARD

Ceiling Mount Kit

XL CMKIT

Switcher

ISS-6020 Video/RGB Switcher

A Serial Digital Interface (SDI) board is optionally available.

XT SDI BOARD

This board accepts the input of non-compressed signal sources such as commercial type digital VTR(e.g., D1/D5-VCR) compatible with digital serial component signals (of the SMPTE 259M-C standard) and provides a high quality image without quantization noise. Note that the BNC cable used with the SDI connector should be Belden 8281 cable, or 3C-2V equivalent cable or better.

Packaged items: SDI board (1), shield case (1), connector cable (1), and installation manual (1)

REMOTE 3 (XLR) Pin Assignments and Signals

REMOTE3

OUTIN

12

2	1	3	IN		OUT
3		3	IN		OUT
3		Pin No.	Signal	Pin No.	Signal
		1	Ground	1	Ground
		2	+3.3V	2	No connection
		3	DATA IN	3	DATA OUT

NOTE: The wireless remote control can operate even if the plug of the remote cable is inserted into REMOTE 3 (XLR) connectors. For the wireless remote control not to operate, insert the plug of the remote cable into the REMOTE2 IN jack.

E – 42

Image 49

NEC XT9000 user manual Optional Accessories, REMOTE 3 XLR Pin Assignments and Signals, Outin

Contents

User’s Manual Bedienungshandbuch XT9000XT9000 User’s ManualHigh Light Output Projection System DOC avis de conformation DOC compliance Notice3. GSGV Acoustic Noise Information Ordinance AVERTISSEMENTInstallation Important SafeguardsTo Dealer or Installer Power SupplyInstallation Recommandations importantesA l’attention du revendeur ou de l’installateur AlimentationHOW LONG IS THE WARRANTY LIMITED WARRANTY USA and Canada onlyWHAT IS COVERED AND WHAT IS NOT COVERED HOW YOU CAN GET WARRANTY SERVICETABLE OF CONTENTS Introduction to the XT9000 Projector INTRODUCTIONGetting Started Whats In The Box?Press to the OFF position 0 to turn the main power off 1. Part Names and FunctionsConnect the supplied power cable here AC Remote sensor ControlsFor the optional XT SDI board Terminal PanelNOTE This projector is compatible with the ISS-6020 Switcher 1. INPUT 3 RGB Connector Mini D-Sub 15 pinNOTE This terminal accepts component signals only NOTE The Pixel Phase is not available Remote ControlRemote Control Battery Installation Remote Control PrecautionsWhen using the remote control wirelessly NOTE This is also considered the LENS SHUTTERSetting Up Your Projector 2. INSTALLATIONNOTE The lens must be installed by service personnel only Throw DistanceMaximum Possible Range for TL-1ZH, TL-2Z and TL-4Z Lens Shift Adjustable RangeFixed Lens TL-08SF Ceiling/ FrontSelecting A Location Moving The ProjectorConnecting the Power Cable and Turning on the Projector 3. SETUPOFF POWER POWER4. Adjust the image position and the image size Set up the projector1. Turn on the projector 2. Select your type of projection Desktop front, ceiling rear, desktop rear, and ceiling frontKeystone Setting up for Double Stacking in Link Mode1 Stacking the Projectors 2 HookupNOTE In the Link mode the Lens Memory feature is not available 6 Link Mode Setting4 Display the internal crosshatch test pattern NOTE Use a different single color for each projectorCeiling Front Projection Projector OrientationCeiling Rear Projection Desktop Rear Projection4. CONNECTIONS When used in standalone operationConnecting Your PC Or Macintosh Computer Connecting Your Document CameraFor more details, contact your dealer When Used with One Switcher ISS-6020/ISS-6020GHow to make connections When Used with Two or More Switchers 100 InputsSet the DIP switch S8601 of the Switcher For more details, contact your dealerISS-6020 Setting of S8601Output to MasterPin No REMOTE 1 ConnectorFUNCTION Pin No When used in stand alone operationSHORT/OPEN FUNCTIONOperating Multiple Projectors with the Remote Control Connecting a PC with the RGB digital connector Using the RGB DIGITAL connectorsSpecify the DVI-D type when you buy DVI cable Connection for Double Stacking in Link ModeUsing The Menus 5. OPERATION3. Adjust The Image One input is switched to anotherA List of Direct Key Combinations NOTE This feature is available for SW 2 Level mode onlyslot without displaying the Select Slot window When Switcher Control is turned on Menu TreeStand alone Preset Time Off Menu windows or dialog boxes typically have the following elements Menu ElementsWhen using with a single Switcher ISS-6020 Menu Descriptions & Functions Source SelectWhen using with two or more Switcher ISS-6020 NOTE Existing direct key settings are overwritten with new settingsWhite Balance Adjust SourcePicture ImageResolution when Auto Adjust is off Horizontal/Vertical Position when Auto Adjust is offVideo Adj Aspect Ratio not available for RGBOption Adj NOTE When connecting with a scan converterLens Memory Ref AdjKeystone Projector Options Factory DefaultTimer turns to the factory presetDate, Time Preset Sleep TimerMenu Menu ModeNOTE These S-Video signals are not used in the US SetupSignal Select RGB1/2 Signal Select VIDEO 1/2, S-VIDEO1/2 and SwitcherNOTE In the Link mode the Lens Memory feature is not available Switcher ControlDefault Source Select Link ModeHelp PC Card FilesContents Source InformationLink Mode Test PatternOptical 6. SPECIFICATIONSElectrical Mechanical Addressable Remote Control wired / wireless26.8 W x 38.3 D x 14.2 H with foot not including lens hood and handle REMOTE 3 XLR Pin Assignments and Signals 7. Optional AccessoriesOUTIN Compatible Input Signal List 8. Compatible Input Signal ListNOTE 2 UXGA can be supported for separate sync signal only Function 9. List of Menu Items Available on Link ModeLink mode Master projectorAppendix DimensionsThe drawings do not include the lens part Adjusting the Focus Tips on Adjusting Focus for Lens Memory FunctionPreparation Recommend NOTE 2 The Lens Memory function is not available in the Link mode