![Horizontal/Vertical Position (when Auto Adjust is off):](/images/new-backgrounds/106820/10682075x1.webp)
Horizontal/Vertical Position (when Auto Adjust is off): | Video Filter |
Adjusts the image location from left to right.
This adjustment is made automatically when the Auto Adjust is turned on.
Aspect Ratio (not available for RGB) :
You can select the aspect ratio for input signal and display area re- spectively.
Select the appropriate aspect ratio using the SELECT ◀ , ▶ , ▲, or
▼button.
NOTE: When "Resolution" is set to "Native", this feature is not available, and the stored settings and adjustments are invalid.
Resolution (when Auto Adjust is off):
This allows you to activate or deactivate the Advanced AccuBlend feature.
Auto | Turns on the Advanced AccuBlend feature. The projector au- |
| tomatically reduces or enlarges the current image to fit the |
| full screen. |
Native | Turns off the Advanced AccuBlend feature. The projector dis- |
| plays the current image in its true resolution. See "Auto Ad- |
| just (RGB Only)" on page |
| Adjust feature. |
NOTE: While you are displaying an image with higher resolution than the projector's native resolution(XGA:1024 x 768), even when you are in the Native mode, the image is displayed full screen using the Advanced AccuBlend feature.
NOTE: An image with lower resolution than XGA(1024 x 768) is displayed smaller when you are in the Native Mode. In this case, you can use the "Lens Memory" feature to adjust lens shift, focus and zoom adjustments to enlarge the image to fill the screen and store the values. (see page
Overscan
You can select overscan percentage for RGB signal.
Select the appropriate option using the SELECT ◀ or ▶ button.
NOTE: When "Resolution" is set to "Native", this feature is not available, and the stored settings and adjustments are invalid.
This feature reduces video noise. Select the appropriate filter for your signal.
Bar 0 | Off |
Bar 1/3 | High |
Bar 2/3 | Medium |
Bar full | Low |
Blanking |
|
This feature allows you to mask any unwanted area of the screen image.
Adjust the Top, Bottom, Left, or Right blanking with the SELECT ◀ or ▶ button.
Video Adj
Noise Reduction
Select one of the following three levels for reducing video noise. Low, Medium or High.
NOTE: The lower the Noise Reduction level, the better the image quality. Increasing Noise Reduction lowers video bandwidth.
E – 31