NEC XT9000 When Used with One Switcher ISS-6020/ISS-6020G, For more details, contact your dealer

When Used with One Switcher (ISS-6020/ISS-6020G)

Up to 10 input signals can be accepted when the projector is connected to one Switcher. Using the projector with the Switcher allows easy adjustment and signal selection.

	RGB DIGITAL
OUTPUT			INPUT9
INPUT3	INPUT2		INPUT1	INPUT4
RGB	R / Cr		R / Cr	Cr
	G / Y		G / Y	Y	OUTPUT
OPTION
IN
	B / Cb		B / Cb	Cb	SDI
OUT
	H / HV		H / HV		INPUT0
REMOTE1	V		V
To REMOTE1
					To INPUT 1
REMOTE2	S-VIDEO1		INPUT5	INPUT6
	Y		VIDEO1	VIDEO2
IN
	C
OUT				S-VIDEO2
	INPUT7		INPUT8
REMOTE3
OUT	IN
			LED		3BNC-3BNC cable(sync on green)
				ON
				OFF	4BNC-4BNC cable(composite)
					5BNC-5BNC coaxial cable
					(separate sync)
Optional control cable 15p-15p					(recommended)
(CTL-6010)
To SYSTEM CONTROL		From R, G, B, H/V on separate H
REMOTE 1		and V. on the RGB OUTPUT module

The Switcher

ISS-6020/ISS-6020G

VCR

Personal computer

• Select [Advanced Menu] → [Projector Options] → [Switcher Control] → [SW1 Level]. See page E-37 for the information in detail.

•For more information on the Switcher, refer to the user's manual accompanying the ISS-6020/ISS-6020G Switcher.

•All cables mentioned above are sold separately.

•The RGB2 terminal will not work with the Switcher Control function.

*When connecting with the VIDEO INPUT MODULE (6020-VID), set the VIDEO MODE select switch (S3001) to "8". The VIDEO MODE select switch is located on the VIDEO INPUT MODULE (6020-VID).

NOTE: While in the Switcher Control mode, a video standard is selected at the projector.

If you set the VIDEO MODE select switch (S3001) to "8" with the QUAD DECODER installed in the Switcher ISS-6020, the image will not be displayed correctly. In that case, first remove the QUAD DECODER from the Switcher ISS-6020.

For more details, contact your dealer.

E – 17