NetComm manual NetComm Liberty Series Wireless N150 Router

NetComm Liberty Series - Wireless N150 Router

5.To use WPA-PSK/WPA2-PSK, please configure the following:

• Change Security to WPA-PSK or WPA2-PSK

• Change Encryption Type to TKIP for WPA-PSK or AES for WPA2-PSK

• Enter the WPA/WPA2 key in the Passphrase field.

Notes: The key needs to be more than 8 characters and less than 63 characters and it can be any combination of letters and numbers.

•Click Apply to save the settings

Notes: Wireless client network cards must be WPA-compliant to connect to a WPA enable network, if in doubt check the wireless client network card documentation, or use WEP security.

Notes: After changing the security settings, you might need to remove the current wireless settings on the computer and reconfigure the wireless computer according to the new settings.

YML1�7WN	NetComm Liberty Series 3G Wireless N150 Router
www.netcomm.com.au	49