NetComm N300 manual 3G Internet Settings, 3G Connection Status, For Non-3G Connections

3G Internet Settings

•Click Apply to save the settings

•If everything is configured properly, the Status page will show that your 3G service is online and the WAN IP address that has been assigned.

3G Connection Status Page

APN (Access Point Name) for various providers

ISP	APN	Username/Password
		Required
Telstra	telstra.Internet	NO
BigPond	telstra.bigpond	YES
Three (Postpaid)	3netaccess	NO
Three (Prepaid)	3services	NO
Vodafone	vfInternet.au	NO
Optus (postpaid)	preconnect	NO
Optus (prepaid)	connect	NO
DODO	dodolns1	NO
	WirelessBroadband	NO
iburst	NO APN	YES User/password only

Note: This table is up to date as of the printing of this manual

For Non-3G Connections

Note: Before proceeding with this step, ensure that your WAN connection has been plugged into the WAN port of your 3G Router

To configure a non WAN connection (Static, DHCP, PPPoE, PPTP), please follow these steps:

•Mouseover Internet Settings and click on WAN

•Select your WAN Connection type from the dropbox (Static, DHCP, PPPoE, PPTP)

•Enter the relevant information on this screen as supplied by your ISP

•Click Apply to save the settings

•If everything is configured properly, the Status page will show that your WAN service is online and the WAN IP address that has been assigned.

Non-3G connection status page:

3g18Wn User Guide	ymYML18WN
14	www.netcomm.com.au