NetComm NP1100 manual Windows Me

Windows® Me

1.As Windows® Me starts the 10/100Mbps Fast Ethernet Adapter will be found and the drivers will be automatically installed. You will need to update the driver to continue.

2.Click on Start – Settings – Control Panel.

3.Open Network and Dial-Up Connections and then open System.

4.Select Device Manager, click on the Realtek RTL8139(A) PCI Fast Ethernet Adaptor under Network Adaptors and click on the Properties button.

5.Select the Driver tab and click on the Update Driver button.

6.The Update Device Driver Wizard screen will appear. Choose Search for a better driver than the one your device is using now. [Recommended], type D:\WINME (where “D” is the letter of your CD-ROM drive) in the Specify a location: box and click on Next>.

7.Select the updated driver and click on Next>.

8	NP1100 10/100Mbps PCI Bus Fast Ethernet Card
	YML567 Rev2