NETGEAR DG834GV v2 manual Connecting the Router to the Internet

Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model

Viewed from left to right, the rear panel contains the following elements:

1.RJ-11 ADSL port for connecting the modem router to an ADSL-capable telephone wall jack via the ADSL port of an ADSL filter/splitter.

2.PSTN (Public Service Telephone Network) port for connecting to a telephone wall jack via the phone port of an ADSL filter/splitter.

3.Phone Ports for connecting to a telephones

4.Four Local Ethernet RJ-45 LAN ports for connecting the modem router to the local computers

5.Factory Default Reset push button

6.AC power adapter inlet

7.Wireless antenna

Each LAN port has two LEDs, one green and one amber. They indicate the port status as follows:

•	On (Green)	LAN port is linked to a 100Mbps device
•	Blink (Green)	Data is being transmitted or received at 100 Mbps
•	On (Amber)	LAN port is linked to a 10Mbps device
•	Blink (Amber)	Data is being transmitted or received at 10 Mbps
•	Off	No link is detected on this port

Connecting the Router to the Internet

To connect your Integrated ADSL Modem Wireless Router with Voice to the Internet, refer to the Integrated ADSL Modem and Wirelesss Router Setup Manual on the resource CD or online at http://documentation.netgear.com/dg834gv/enu/208-10042-01/index.html.

2-10 Introduction

v1.0, September 2006