NETGEAR DG834GV v2 manual Connect Automatically, as Required, Disable Port Scan and DOS Protection

Reference Manual for the Integrated ADSL Modem and Wireless Router with Voice, Model

2.From the Main Menu, under Advanced, click the WAN Setup link to view the page shown:

Figure 7-1

3.Select the Default DMZ Server check box.

4.Type the IP address for that server.

5.Click Apply to save your changes.

Connect Automatically, as Required

Normally, this option should be enabled, so that an Internet connection will be made automatically, whenever Internet-bound traffic is detected. If this causes high connection costs, you can disable this setting.

If disabled, you must connect manually, using the sub-screen accessed from the "Connection Status" button on the Status screen.

If you have an "Always on" connection, this setting has no effect.

Disable Port Scan and DOS Protection

The Firewall protects your LAN against Port Scans and Denial of Service (DOS) attacks. This should be disabled only in special circumstances.

Advanced Configuration 7-3

v1.0, September 2006