NETGEAR DG834GV v2 manual Chapter Advanced Configuration

Upgrading the Modem Router’s Firmware	6-3
How to Upgrade the Modem Router Firmware	6-3
Network Management Information	6-5
Viewing Modem Router Status and Usage Statistics	6-5
Viewing Attached Devices	6-10
Viewing, Selecting, and Saving Logged Information	6-10
Examples of Log Messages	6-13
Enabling Security Event E-mail Notification	6-14
Running Diagnostic Utilities and Rebooting the Modem Router	6-16
Enabling Remote Management	6-17
Configuring Remote Management	6-17
Chapter 7
Advanced Configuration
Configuring Advanced Security	7-1
Setting Up A Default DMZ Server	7-2
Connect Automatically, as Required	7-3
Disable Port Scan and DOS Protection	7-3
Respond to Ping on Internet WAN Port	7-4
MTU Size	7-4
Configuring LAN IP Settings	7-4
DHCP	7-6
How to Configure LAN TCP/IP Settings	7-9
Configuring Dynamic DNS	7-10
How to Configure Dynamic DNS	7-10
Using Static Routes	7-12
Static Route Example	7-12
How to Configure Static Routes	7-13
Universal Plug and Play (UPnP)	7-14
Chapter 8
Troubleshooting
Basic Functioning	8-1
Power LED Not On	8-2
Test LED Never Turns On or Test LED Stays On	8-2
LAN or Internet Port LEDs Not On	8-3
Troubleshooting the Web Configuration Interface	8-3

3

v1.0, September 2006