NETGEAR FS700TS manual Front Panel Buttons, System LEDs, Solid Yellow PoE LED Mode

Models: FS700TS

1 42
Download 42 pages 43.52 Kb
Page 22
Image 22

Hardware Installation Guide for the Prosafe Stackable Smart Switch FS700TS Series

System LEDs

The following table describes the system LED designations.

Table 2-3. System LEDs

LED

Designation

 

 

Port 1-24 Mode LED

Solid Green: Ethernet LED Mode (default)

 

Solid Yellow: PoE LED Mode

Stack ID LED—One 7-segment

Green: Displays Stack ID (1-6).

LED Display

 

 

 

Stack Master LED

Solid Green: Switch acts as a master unit in a stack of switches. The

 

Stack Master LED is lit if there is an active stack link, and the unit is in

 

stack mode.

 

Off: Switch acts as a slave unit in a stack of switches.

Power LED

Solid Green: Power is supplied to the switch and is operating normally.

 

Off: Power is disconnected.

MAX POE LED

Solid Yellow: Indicates less than 7W of PoE power is available.

 

Flashing Yellow: Indicates the PoE MAX LED was active in the

 

previous two minutes.

 

Off: There is at least 7W of PoE power available for another device

Front Panel Buttons

Reset Button

The Smart Switch has a Reset Button to trigger a hardware reset of the switch. This is equivalent to turning the power off and back on. The last saved configuration will be loaded onto the switch as it resets. The LEDs on the switch should go out and then come back on as the switch goes through its Power On Switch Test (POST).

Factory Defaults Button

The Smart Switch has a Factory Default Button to enable the clearing out of the current configuration and returning the device back to the factory settings. This will remove all settings, including the password, VLAN settings and port configurations. If the switches are in a stack, the stacking settings are cleared by the Factory Defaults Button.

Port 1-24 Mode Select (FS752TPS only)

See Port 1-24 Mode LED description in Table 2-3.

2-12

Introduction

v1.0, December 2005

Page 22
Image 22
NETGEAR FS700TS manual Front Panel Buttons, System LEDs, Solid Yellow PoE LED Mode

FS700TS specifications

The NETGEAR FS700TS is a reliable and efficient switch designed for small to medium-sized businesses that require robust network solutions. This product is part of NETGEARā€™s FS series, well-known for delivering cost-effective Ethernet switching technologies. The FS700TS is specifically engineered to enhance network performance, security, and manageability.

One of the key features of the FS700TS is its 24-port capacity. This gives organizations ample room to connect various devices, ensuring that all networked equipment can communicate seamlessly. Each port supports auto-sensing, which allows for automatic detection of the connected devices, making setup incredibly straightforward. This plug-and-play design eliminates the need for complex configurations, enabling businesses to deploy their networks without extensive IT resources.

The FS700TS is equipped with Layer 2 switching capabilities, providing enhanced data handling processes. It supports features like VLAN tagging, allowing for the segmentation of network traffic for improved performance and security. The ability to create virtual LANs improves network efficiency by minimizing broadcast traffic and enabling a more organized networking environment.

Another standout characteristic of the NETGEAR FS700TS is its Quality of Service (QoS) capabilities. This feature ensures that critical data traffic, such as voice over IP or video conferencing, is prioritized, leading to a better overall user experience. By allocating bandwidth dynamically, FS700TS helps prevent lag and delays in communication.

Power consumption is also a notable factor with the FS700TS. It is designed with energy efficiency in mind, aligning with the Energy Star standards. This commitment to reducing power usage not only lowers operational costs for businesses but also contributes positively to environmental sustainability efforts.

In terms of build quality, the FS700TS features a sturdy metal chassis, ensuring durability in various environments. Its compact design allows for flexible placement in network racks, saving valuable space in server rooms or offices.

Overall, the NETGEAR FS700TS provides a solid combination of performance, manageability, and scalability. Its advanced features, such as VLAN support, QoS, and energy efficiency, make it an excellent choice for businesses looking to enhance their networking capabilities without overspending. With the reliability that NETGEAR is known for, the FS700TS is poised to meet the demands of modern networking needs effectively.