FS728TP Smart Switch Software Administration Manual
4-42 Configuring Switching Settings
v1.1, September 2009
are forwarding packets and Multicast traffic. A port requesting to join a specific Multicast group
issues an IGMP report specifying that Multicast gr oup. This results in the creation of the Multicast
filtering database.
To configure Basic IGMP Snooping:
1. Click Switching > Multicast > Basic > IGMP Snooping Configuration. The Basic IGMP
Snooping Configuration screen displays:
The Basic IGMP Snooping Configuration screen contains the following fields:
IGMP Snooping Configuration
•IGMP Snooping Status – Select the IGMP Snooping status on the device. The possible
field values are:
– Disable – Disables IGMP Snooping on the device. This is the default value.
– Enable – Enables IGMP Snooping on the device.
Interface Settings
•VLAN ID – Displays the VLAN ID.
•Status – Select the IGMP Snooping status on the VLAN. The possible field values are:
Figure 4-23