NETGEAR FS728TP - page 91

FS728TP Smart Switch Software Administration Manual
3-54 Managing System Settings
v1.1, September 2009
•VID – Displays the protoc ol VLAN ID.
•Supported – Displays the supported Port and Protocol VLAN IDs.
• Enabled – Displays the Enabled Port and Protocol VLAN IDs.
VLAN IDs
•VID – Displays the Port and Protocol VLAN ID.
•VLAN Names – Displays the advertised VLAN names.
Pro tocol IDs
•Pro tocol ID – Displays the advertised protocol IDs.
MED Details
•Capabilities Supported – Displays the MED capabilities enabled on the port.
•Current Capabilities – Displays the MED TLVs advertised by the port.
•Device Class – Displays the LLDP-MED endpoint device class. The possible device
classes are:
– Endpoint Class 1 – Indicates a generic endpoint class, offering basic LLDP services.
– Endpoint Class 2 – Indicates a media endpoint class, offering media streaming
capabilities as well as all Class 1 features.
– Endpoint Class 3 – Indicates a communications device class, offering all Class 1 and
Class 2 features plus location, 911, Layer 2 switch support and device information
management capabilities.
•PoE Device Type – Displays the port PoE type. For example, Powered.
•PoE Power Source – Displays the port’s power source.
•PoE Power Priority – Displays the port’s power priority.
•PoE Power Value – Displays the port’s power value.
•Hardware Revision – Displays the hardware version.
•Firmware Revision – Displays the firmware version.
•Software Revision – Displays the software version.
•Serial Number – Displays the device serial number.
• Manufacturer Name – Displays the device manufacturer name.
•Model Name – Displays the devic e model name.