NETGEAR FS728TP manual Trap Configuration

FS728TP Smart Switch Software Administration Manual

–Read Only – Indicates Management access is restricted to read-only. Changes cannot be made to the device configuration and to the community.

–Read Write – Indicates Management access is read-write. Changes can be made to the device configuration but not to the community.

–SNMP Admin – Indicates the user has access to all device configuration options, as well as permissions to modify the community.

2.Select the community entry.

3.Enter the Management Station IP, Management Station IP Mask and Community String in the provided fields in the first row.

4.Select the Access Mode from the list in the provided field in the first row.

5.Click APPLY to update the device.

To add a new SNMP community:

1.Click System > SNMP > SNMPv1/v2 > Community Configuration. The Community Configuration screen displays.

2.Enter the Management Station IP, Management Station IP Mask and Community String in the provided fields in the first row.

3.Select the Access Mode from the list in the provided field in the first row.

4.Click ADD to update the device.

To remove an SNMP community:

1.Click System > SNMP > SNMPv1/v2 > Community Configuration. The Community Configuration screen displays.

2.Select the entry to be removed.

3.Click DELETE to remove the entry.

Trap Configuration

The SNMPv1/v2 Trap Configuration screen contains information for defining filters that determine whether traps are sent to specific users, and the trap type sent. SNMP notification filters provide the following services:

•Identifying Management Trap Targets

•Defining Trap Filtering

•Defining Trap Generation Parameters

Managing System Settings 3-17

v1.1, September 2009