NETGEAR manual FS728TP Smart Switch Software Administration Manual

FS728TP Smart Switch Software Administration Manual

•Single Connection – Select whether a single open connection between the host Authentication Port and the TACACS+ server is enabled or disabled. The possible field values are:

–Enable – Enables a single connection.

–Disable – Disables a single connection.

•Active – Select whether this server is the Primary or Backup TACACS+ server used for authentication. The possible values are:

–Primary – Defines the TACACS+ server as the Primary Server.

–Backup – Defines the TACACS+ as the Backup Server.

2.Select the TACACS+ server entry.

3.Enter the Host IP Address, Key String, Authentication Port and Timeout for Reply in the provided fields in the first row.

4.Select the Single Connection status and Active server from the lists in the provided fields in the first row.

5.Click APPLY to update the device.

To add a new TACACS+ server entry:

1.Click Security > Management Security > TACACS+. The TACACS+ screen displays.

2.Enter the Host IP Address, Key String, Authentication Port and Timeout for Reply in the provided fields in the first row.

3.Select the Single Connection status and Active server from the lists in the provided fields in the first row.

4.Click ADD to update the device.

To remove a TACACS+ server entry:

1.Click Security > Management Security > TACACS+. The TACACS+ screen displays.

2.Select the TACACS+ server entry.

3.Click DELETE to remove the entry.

Managing Security 6-7

v1.1, September 2009