FS728TP Smart Switch Software Administration Manual
5-8 Configuring QoS
v1.1, September 2009
– Enable – Enables egress shaping rate on the interface.
– Disable – Disables egress shaping rate on the interface. This is the default value.
•Egress Shaping Rates CIR – Enter the Egress Shaping Committed Information Rate
(CIR) in kilobits per second. The possible field range is .
2. Select the interface.
3. Choose either Enable or Disable in the Ingress Rate Limit Status provided field in the first
row.
4. If you selected Enable in the Ingr ess Rate Limit Status field, enter the Ingress Rate Limit in
the provided field in the first row.
5. Choose either Enable or Disable in the Egress Sh aping Rate Status provided field in the first
row.
6. If you selected Enable in the Egress Shaping Rate Status field, enter the Egress Shaping
Rates CIR in the provided field in the first row.
7. Click APPLY to update the device.
Advanced
The CoS Advanced menu contains the following options:
•“CoS to Queue Mapping”
•“DSCP to Queue Mapping”
•“Creating Class Mapping”
•“Policy Tabl e Mapping”
•“Policy Binding”
CoS to Queue Mapping
The CoS to Queue Mapping screen contains fields for mapping CoS value s to traffic queues.
To map CoS values to queues:
1. Click QoS > CoS> Advanced > CoS to Queue Mapping. The CoS to Queue Mapping screen
displays: