NETGEAR RP614v4 Cable/DSL Router manual Router’s Front Panel, Status Light Descriptions

RP614v4 Cable/DSL Router Reference Manual

The Router’s Front Panel

The front panel of the RP614v4 router contains the status lights described below.

24

13

Figure 1-1

You can use the status lights to verify connections. Viewed from left to right, the table below describes the lights on the front panel of the router.

Table 1-1. Status Light Descriptions

LED		Activity	Description
1.	Power	On Green Solid	Power is supplied to the router.
		Off	Power is not supplied to the router.
2.	Test	On	The router is initializing or in the middle of a firmware upgrade.
		Off	The router is ready and running.
3. Internet		On—Amber	The Ethernet cable is connected but the router has not acquired an
			Internet address.
		On—Green	The router has an Internet address.
		Blink—Green	Data is being transmitted or received by the Internet port.
4.	LAN	On—Green	The LAN (local area network) port is connected to a 100 Mbps device.
		Blink—Green	Data is being transmitted or received at 100 Mbps.
		On—Amber	The Local port has detected link with a 10 Mbps device.
		Blink—Amber	Data is being transmitted or received at 10 Mbps.
		Off	No link is detected on this port.

1-2 Introduction

v3.0, 2006-03