RP614v4 Cable/DSL Router Reference Manual
4-8 Advanced Configuration of the Router
v3.0, 2006-03
If you are willing to risk open access, the WAN Setup menu shown below lets you configure a
Default DMZ Server.
Figure 4-5
To assign a computer or server to be a Default DMZ server, follow these steps:
1. Click the WAN Setup link on the Advanced section of the main menu.
2. Check the Default DMZ Server box and type the IP address for that server. To remove the
default DMZ server, uncheck the Default DMZ Server box.
3. Click Apply.
Disabling the SPI Firewall

The SPI (Stateful Packet Inpection) Firewall protects your LAN against Denial of Service

attacks. This should only be disabled in special circumstances.

Responding to Ping on the Internet WAN Port
If you want the router to respond to a 'ping' from the Internet, click the ‘Respond to Ping on
Internet WAN Port’ check box. This should only be used as a diagnostic tool, since it allows your
router to be discovered. Do not check this box unless you have a specific reason to do so.