Reference Manual for the Double 108 Mbps Wireless Firewall Router WGU624

Figure 7-4: LAN IP Setup Menu

The LAN IP parameters are:

IP Address: This is the LAN IP address of the router.

IP Subnet Mask: This is the LAN Subnet Mask of the router. Combined with the IP address, the IP Subnet Mask allows a device to know which other addresses are local to it, and which must be reached through a gateway or router.

RIP Direction: RIP (Router Information Protocol) allows a router to exchange routing information with other routers. The RIP Direction selection controls how the router sends and receives RIP packets. Both is the default.

When set to Both or Out Only, the router will broadcast its routing table periodically.

When set to Both or In Only, it will incorporate the RIP information that it receives.

When set to None, it will not send any RIP packets and will ignore any RIP packets received.

Advanced Configuration

7-9

M-10153-01

Page 87
Image 87
NETGEAR WGU624 manual LAN IP Setup Menu