Reference Manual for the Double 108 Mbps Wireless Firewall Router WGU624

Wireless Mode. This field determines which data communications protocols will be used:

a only — dedicates the WGU624 to communicating with 802.11a wireless devices exclusively.

108 Mbps only — only compatible 802.11a wireless stations that support 108 Mbps can connect.

Auto 108 Mbps — all 802.11a and NETGEAR 108 Mbps wireless stations can be used.

Security Mode:

Open System — allows any device to join the network, assuming that the device SSID matches the router SSID. Alternatively, the device can use the “ANY” SSID option to associate with any available router within range, regardless of its SSID.

Shared Key — only those computers that possess the correct authentication key can join the network.

802.1x — defines port-based, network access control used to provide authenticated network access and automated data encryption key management. 802.1x uses a protocol called EAP (Extensible Authentication Protocol).

WPA-PSK(Wi-Fi Protected Access Pre-Shared Key) — use WPA standard encryption

WPA — (Wi-Fi Protected Access) — use WPA standard encryption

Cipher Type:

Disable

WEP (Wired Equivalent Privacy) — use WEP 64, 128 or 152 bit data encryption.

AES — Advanced Encryption Standard, a symmetric 128-bit block data encryption technique. It is an iterated block cipher with a variable block length and a variable key length.

TKIP — the Temporal Key Integrity Protocol mechanism shares a starting key between devices. Each device then changes its encryption key for every packet.

Basic 802.11g Wireless Settings

To configure the 802.11 g wireless settings of your router, click the Wireless g link in the main menu of the browser interface. The Wireless 802.11g Settings menu appears, as shown below.

4-6

Wireless Configuration

M-10153-01

Page 44
Image 44
NETGEAR WGU624 manual Basic 802.11g Wireless Settings, Security Mode