NETGEAR WGU624 manual Configuring WAN Setup Options, WAN Setup menu

Reference Manual for the Double 108 Mbps Wireless Firewall Router WGU624

3.Click the Add button.

4.Type a name for the service.

5.Enter unused port numbers for the Outgoing Start Port and End Port. To trigger only one port, enter it again in the Outgoing End Port box. To specify a range of ports, enter the last port to be triggered in the End Port box.

6.Enter unused port numbers for the Incoming Start Port and End Port. To trigger only one port, enter it again in the Incoming End Port box. To specify a range of ports, enter the last port to be forwarded in the End Port box.

7.Enter the IP address of the local server or computer in the corresponding Server IP Address box.

8.Click Add.

9.Select the Turn on Port Triggering check box.

10.Specify the Port Triggering Timeout value.

11.Click Apply at the bottom of the menu to save your new configuration.

Configuring WAN Setup Options

The WAN Setup options let you enable the DMZ port, change the MTU size and enable the wireless router to respond to a Ping on the WAN port. These options are discussed below.

Figure 7-3: WAN Setup menu.

7-6 Advanced Configuration

M-10153-01