NETGEAR manual Connecting the WGU624, Connecting the Wireless Router

Reference Manual for the Double 108 Mbps Wireless Firewall Router WGU624

Connecting the WGU624

This section provides instructions for connecting the Double 108 Mbps Wireless Firewall Router WGU624. Also, the Double 108 Mbps Wireless Router WGU624 Resource CD included with your router contains an animated Installation Assistant to help you through this procedure.

Connecting the Wireless Router

Follow the steps below to connect your router to your network. You can also refer to the Double 108 Mbps Wireless Router WGU624 Resource CD included with your router which contains an animated Installation Assistant to help you through this procedure.

1.CONNECT THE WIRELESS ROUTER, THE COMPUTER, AND THE MODEM.

a.Turn off your computer and your cable or DSL modem.

b.Locate the Ethernet cable (Cable 1 in the diagram below) that connects your PC to the modem.

c.Disconnect the cable at the computer end only, point A in the diagram.

A

	&DEOH
	,QWHUQHW
FRPSXWHU	PRGHP

Figure 3-1: Disconnect the Ethernet cable from the computer

d.Look at the label on the bottom of the wireless router. Locate the Internet port. Securely insert the Ethernet cable from your modem (Cable 1 in the diagram below) into the Internet port of the wireless router as shown in point B in the diagram below.

3-4 Connecting the Router to the Internet

M-10153-01