NETGEAR WN511T user manual Setting up WPA-PSK Security

NETGEAR RangeMax™ NEXT Wireless Notebook Adapter WN511T User Manual

b. Use the icon to open the Smart Wizard. The Settings tab page opens.

Figure 3-8

2.Configure the Security settings.

a.In the Profile box, select the profile or type in a profile name.

b.In the Network Name (SSID) field select the network, or enter the SSID.

Note: You will not get a wireless network connection unless the network SSID matches exactly what is configured in the access point.

c.In the Security section, select WPA2-PSK [AES].

For more information about WPA2-PSK security, see the Web link to “Wireless Communications:” in Appendix B.

3.Save your settings in a Profile.

a.Click the Save Profile button. All the configuration settings are saved in this profile.

b.Click Apply.

c.Click Close to exit the Smart Wizard.

Setting up WPA-PSK Security

Follow the steps below to configure WPA-PSK Security.

1.Run the Wireless Adapter Smart Wizard.

a.Make sure the software is installed and the Wireless Adapter is fully inserted in a Cardbus slot in your computer.

22 Network Connections and Wireless Security

vv1.1, April 2006