Netopia 3346N-ENT, 3346NENT manual Connecting to an Ethernet Network

3-2 Getting Started Guide

Ethernet: Ethernet hardware and software drivers enable your PC or Macintosh computer to communicate on the LAN.

Once the Netopia 4-port ADSL Router is properly configured and connected to your LAN, PC and Macintosh computers that have their required components in place will be able to connect to the Internet or other remote IP networks.

Connecting to an Ethernet Network

You can connect a standard 10/100Base-T Ethernet network to the Netopia 4-port ADSL Router using any of its Ethernet ports.

Netopia 4-port ADSL Router back panel

4 3 LAN 2 1 Power Off / On

DSL

If you add devices connected through a hub or switch, connect the hub or switch to an Ethernet port on the Netopia 4-port ADSL Router.

The Netopia 4-port ADSL Router in a 10/100Base-T network

To connect your 10/100Base-T	4	3 LAN 21
network to the Netopia 4-port	DSL
ADSL Router through the Ethernet
port, use standard Category 5
Ethernet cables with RJ-45	PC
connectors.
		PC
You can attach additional devices	Macintosh
using standard Category 5
Ethernet cables (not provided)
connected to a 10- or 100Base-T
Ethernet hub or switch. The ports
on the router will auto detect 10-
or 100Base-T. Crossover cables
are not required.

Power Off / On

Macintosh

PC

Ethernet

Switch

PC

PC