Pioneer DEH-P610BT Disconnecting a Bluetooth device, Deleting a paired Bluetooth device

	Section
Using Bluetooth wireless technology	08

#Push MULTI-CONTROL left or right to display the device name and BD address.

6Press MULTI-CONTROL to establish con- nection.

While connecting, PAIRING flashes. If the con-

nection is established, PAIRED is displayed.

# If the connection fails, ERROR is displayed. In

this case, try again from the beginning.

# PIN code is set to 0000 as the default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless con- nection on page 31.

Disconnecting a Bluetooth device

This function can be operated only when the Bluetooth wireless connection is being estab- lished.

1 Display the connection menu.

Refer to Introduction to connection operations on page 27.

2Use MULTI-CONTROL to select

DISCONNECT.

3Push MULTI-CONTROL up or down to

select a device.

# If only one device was found, this step cannot be performed.

4Press MULTI-CONTROL to disconnect the Bluetooth wireless connection. While disconnecting, DISCONNECTING flashes. If the Bluetooth wireless connection is

terminated, DISCONNECTED is displayed.

# If multiple Bluetooth devices have been con- nected and you wish to disconnect them, press MULTI-CONTROL and then select the device. In this case, repeat operation from step 3.

Deleting a paired Bluetooth device

1 Display the connection menu.

Refer to Introduction to connection operations

on page 27.

2Use MULTI-CONTROL to select

DELETE DEVICE.

3Push MULTI-CONTROL up or down to

select a device.

# If only one device was found, this step cannot

be performed.

# Push MULTI-CONTROL left to display the BD

address.

# If device name cannot be obtained, BD ad- dress is displayed.

4When the device name is being dis- played, push MULTI-CONTROL right to dis- play DELETE YES.

Deleting device is now on standby.

# If you do not want to delete the device, push MULTI-CONTROL left.

5Press MULTI-CONTROL to delete the de- vice.

While deleting, DELETING flashes. After the device is deleted, DELETED is displayed.

Connecting a paired Bluetooth device and selecting a service

Bluetooth service of the paired device can be selected. You can choose a Bluetooth service from PHONE service, AVRCP service or A2DP service.

1 Display the connection menu.

Refer to Introduction to connection operations on page 27.

2Use MULTI-CONTROL to select

PAIRED DEVICE.

3Push MULTI-CONTROL up or down to

select a device.

# If only one device was found, this step cannot

be performed.

# Push MULTI-CONTROL left or right to switch

the BD address and device name.

# If device name cannot be obtained, BD ad- dress is displayed.

English

En 29