Built-in CD Player, Selecting a track directly, Clear

Section

05Built-in CD Player

!Depending on the version of iTunes used to write MP3 files onto a disc, comment informa- tion may not be correctly displayed.

!Depending on the version of Windows Med- iaä Player used to encode WMA files, album

names and other text information may not be correctly displayed.

!When Ever Scroll is set to ON at the initial set- ting, text information scrolls continuously in

the display. Refer to Switching the ever scroll on page 44.

2Use MULTI-CONTROL to select the de- sired track title.

Turn to change the track title. Press to play.

# You can also change the track title by pushing

MULTI-CONTROL up or down.

# To return to the ordinary display, press

BAND/ESC or /LIST.

# If you do not operate the list within about 30

seconds, the display automatically returns to the ordinary display.

Selecting a track directly

When using the remote control, you can select a track directly by entering the desired track number.

When audio files are being played back, you can select track in the current folder.

1 Press DIRECT.

Track number input display appears.

2Press 0 to 9 to enter the desired track

number.

# You can cancel the input number by pressing

CLEAR.

3Press DIRECT.

The track for the entered number will play.

Note

After entering the number input mode, if you do not perform an operation within about eight sec- onds, the mode is automatically canceled.

Selecting tracks from the track title list

Track title list lets you see the list of track titles on a CD TEXT disc and select one of them to play back.

1Press /LIST to switch to the track title list mode.

Selecting files from the file name list

File name list lets you see the list of file names (or folder names) and select one of them to playback.

1Press /LIST to switch to the file name list mode.

Names of files and folders appear in the dis- play.

2Use MULTI-CONTROL to select the de- sired file name (or folder name).

Turn to change the name of file or folder.

—when a file is selected, press to play.

—when a folder is selected, press to see a list of files (or folders) in the selected folder.

—when a folder is selected, press and hold to

play a song in the selected folder.

#You can also play the file by pushing MULTI-CONTROL right.

#You can also play a song in the selected folder by pushing and holding MULTI-CONTROL right.

#To return to the previous list (the folder one level higher), push MULTI-CONTROL left.

#To return to the ordinary display, press BAND/ESC or /LIST.

#If you do not operate the list within about 30