Pioneer DEH-P610BT Other Functions Using the AUX source, Turning the clock display on or off

Section

11Other Functions

Using the AUX source Selecting AUX as the source

Up to two auxiliary devices such as VCR or portable devices (sold separately) can be con- nected to this unit. When connected, auxiliary devices are automatically read as AUX sources and assigned to AUX1 (auxiliary device 1) or AUX2 (auxiliary device 2). The relationship be- tween AUX1 (auxiliary device 1) and AUX2 (auxiliary device 2) sources is explained below.

About AUX1 (auxiliary device 1) and AUX2 (auxiliary device 2)

There are two methods to connect auxiliary de- vices to this unit.

AUX1 (auxiliary device 1) source:

When connecting auxiliary device using a stereo mini plug cable

%Insert the stereo mini plug into the input jack on this unit.

For more details, refer to What’s what on page 10.

This auxiliary device is automatically set to AUX1 (auxiliary device 1).

%Press SRC/OFF to select AUX as the

source.

# If the auxiliary setting is not turned on, AUX cannot be selected. For more details, refer to Switching the auxiliary setting on page 43.

Setting the AUX title

The title displayed for the AUX1 (auxiliary de- vice 1) or AUX2 (auxiliary device 2) source can be changed.

1After you have selected AUX as the source, use MULTI-CONTROL and select FUNCTION to display TITLE INPUT.

2Enter a title in the same way as the built-in CD player.

For details concerning operation, refer to En- tering disc titles on page 20.

Turning the clock display on or off

You can turn the clock display on or off.

!Even when the sources are off, the clock display appears on the display.

AUX2 (auxiliary device 2) source:

When connecting auxiliary device using an IP- BUS-RCA Interconnector (sold separately)

%Use an IP-BUS-RCA Interconnector such as the CD-RB20/CD-RB10 (sold separately) to connect this unit to auxiliary device fea- turing RCA output.

For more details, refer to the IP-BUS-RCA Inter- connector owner’s manual.

This auxiliary device is automatically set to

AUX2 (auxiliary device 2).

# You can only make this type of connection if the auxiliary device has RCA outputs.

%Press CLOCK/DISP OFF to turn the clock display on or off.

Each press of CLOCK/DISP OFF turns the

clock display on or off.

# The clock display disappears temporarily

when you perform other operations, but the clock display appears again after 25 seconds.

Switching the display indication and button illumination

Display indication and button illumination can be switched on or off.

46 En