Pioneer DEH-P610BT operation manual Initial Settings Setting the internal power, Amplifier

Section

10 Initial Settings

Setting the internal power	1 Display the initial setting menu.
amplifier	Refer to Adjusting initial settings on page 42.

This unit features high power amplifier. How- ever, in particular system, external amplifiers are used instead of internal amplifier. If you use external amplifiers in order to establish a multi-amp system, and don’t use internal am- plifier, it is recommended to turn off the inter- nal amplifier. Turning off internal amplifier reduces the noise that comes from the beha- vior of internal amplifier.

1Display the initial setting menu. Refer to Adjusting initial settings on page 42.

2Use MULTI-CONTROL to select AMP.

3Press MULTI-CONTROL to turn the inter-

nal power amplifier on.

# To turn the internal power amplifier off, press MULTI-CONTROL again.

Switching the ever scroll

When Ever Scroll is set to ON, recorded text in- formation scrolls continuously in the display. Set to OFF if you prefer the information to scroll just once.

1Display the initial setting menu. Refer to Adjusting initial settings on page 42.

2Use MULTI-CONTROL to select EVERSCROLL in the initial setting menu.

3Press MULTI-CONTROL to turn the ever

scroll on.

# To turn the Ever Scroll off, press MULTI-CONTROL again.

Activating the BT AUDIO source

You need to activate the BT AUDIO source in order to use a Bluetooth audio player.

This setting is set to on by default. If you do not use BT AUDIO, you can turn it off.

2Use MULTI-CONTROL to select BT AUDIO in the initial setting menu.

3Press MULTI-CONTROL to turn the

BT AUDIO source on.

# To turn the BT AUDIO source off, press MULTI-CONTROL again.

Resetting the Bluetooth wireless technology module

Bluetooth telephone and Bluetooth Audio data can be deleted. To protect personal infor- mation, we recommend deleting this data be- fore transferring the unit to other persons. The following settings will be deleted.

!phone book entries on the Bluetooth tele- phone

!preset numbers on the Bluetooth tele- phone

!registration assignment of Bluetooth tele- phone

!call history of Bluetooth telephone

!history of the most recently connected Bluetooth audio

1Display the initial setting menu. Refer to Adjusting initial settings on page 42.

2Use MULTI-CONTROL to select

BT MEMORY CLR.

3Push MULTI-CONTROL right to show a confirmation display.

YES is displayed. Clearing memory is now on

standby.

# If you do not want to reset phone memory, push MULTI-CONTROL left. The display reverts.

4Press MULTI-CONTROL to clear the memory.

CLEARED is displayed and the settings are deleted.

44 En