
Section
08
Using Bluetooth wireless technology
4Press
5Push
PHONE—AVRCP—A2DP
# “*” is displayed on the connected service.
# Profile that is not compatible with the con- nected device cannot be selected.
6Press
Connecting to a Bluetooth device automatically
It is possible to set the automatic connection between your Bluetooth device and this unit. If this function is set to on, connection between your Bluetooth device and this unit will take place automatically as soon as the two devices are less than a few meters apart.
!Initially, this function is set to on.
1 Display the connection menu.
Refer to Introduction to connection operations on page 27.
2Use
A.CONNECTION.
3Press
If your Bluetooth device is ready for Bluetooth wireless connection, connection to this unit is
automatically established.
# To turn automatic connection off, press
Displaying system version for repair
Should this unit fails to operate properly and you consult your dealer for repair, you may be asked to indicate the system versions of this unit and of Bluetooth module. You can display the versions and confirm them.
1 Display the connection menu.
Refer to Introduction to connection operations on page 27.
2Use
BT VER INFO.
The system (microprocessor) version of this unit is displayed.
3Push
unit.
# Pushing
Displaying BD (Bluetooth Device) address
This unit displays the BD address of this unit.
1 Display the connection menu.
Refer to Introduction to connection operations on page 27.
2Use
3Push
# Pushing
Editing device name
You can edit the device name.
The device name is set to PIONEER BT as de- fault.
1 Display the connection menu.
Refer to Introduction to connection operations on page 27.
2Use
DEVICE EDIT.
3Push
select a letter of the alphabet.
# Device name can be up to 32 characters long.
30
En