
| Section |
Audio Adjustments | 09 |
|
|
!CUSTOM is an adjusted equalizer curve that you create.
!When FLAT is selected, no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve.
1 Display the audio menu.
Refer to Introduction of audio adjustments on the previous page.
2Use
3Turn
Adjusting equalizer curves
The factory supplied equalizer curves can be adjusted to a fine degree (nuance control).
1 Display the audio menu.
Refer to Introduction of audio adjustments on the previous page.
2Use
3Push
4Push
or decreased.
# You can then select another band and adjust the level.
Fine-adjusting equalizer curve
You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (LOW/MID/HI).
Level (dB)
Q=2N Q=2W
Center frequency Frequency (Hz)
1 Display the audio menu.
Refer to Introduction of audio adjustments on the previous page.
2Use
3Push
Low:
Mid:
High:
4Push
adjust the Q factor.
Adjusting loudness
Loudness compensates for deficiencies in the low- and
1 Display the audio menu.
Refer to Introduction of audio adjustments on the previous page.
2Use
LOUDNESS.
3Press
on.
Loudness level (e.g., MID) appears in the dis-
play.
# To turn loudness off, press
English
En 39