Section

10Initial Settings

Adjusting initial settings

Setting the date

Using the initial settings, you can customize various system settings to achieve optimal per- formance from this unit.

1Press SRC/OFF and hold until the unit turns off.

2Press MULTI-CONTROL and hold until the initial setting menu appears in the dis- play.

3Turn MULTI-CONTROL to select one of the initial settings.

LANGUAGE (language selection)— CALENDAR (calendar)—CLOCK (clock)— WARNING (warning tone)—AUX1 (auxiliary input 1)—AUX2 (auxiliary input 2)—REAR SP (rear output and subwoofer output)—AMP (power amp setting)—EVERSCROLL (ever scroll)—BT AUDIO (Bluetooth audio)—

BT MEMORY CLR (clearing Bluetooth mem- ory)—S/W UPDATE (software update)

Use the following instructions to operate each

particular setting.

# To cancel initial settings, press BAND/ESC.

The calendar display adjusted in this mode ap- pears when the telephone source is selected or sources and the feature demo are off.

1 Display the initial setting menu.

Refer to Adjusting initial settings on this page.

2Use MULTI-CONTROL to select CALENDAR in the initial setting menu.

3Push MULTI-CONTROL left or right to select the segment of the calendar display you wish to set.

Pushing MULTI-CONTROL left or right will se- lect one segment of the calendar display: Day—Month

As you select segments of the calendar dis- play the segment selected will blink.

4Push MULTI-CONTROL up or down to set the date.

Pushing MULTI-CONTROL up will increase the selected day or month. Pushing

MULTI-CONTROL down will decrease the se- lected day or month.

Selecting the language

For your convenience, this unit equips multi- ple language display. You can select the lan- guage best suited to your first language.

1 Display the initial setting menu.

Refer to Adjusting initial settings on this page.

2Use MULTI-CONTROL to select LANGUAGE in the initial setting menu.

3Push MULTI-CONTROL left or right to select the language.

ENG (English)—ESPAÑOL (Spanish)

4Press MULTI-CONTROL to determine the selection.

Setting the clock

Use these instructions to set the clock.

1 Display the initial setting menu.

Refer to Adjusting initial settings on this page.

2Use MULTI-CONTROL to select CLOCK in the initial setting menu.

3Push MULTI-CONTROL left or right to select the segment of the clock display you wish to set.

Pushing MULTI-CONTROL left or right will se- lect one segment of the clock display: Hour—Minute

As you select segments of the clock display,

the selected segment blinks.

# You can match the clock to a time signal by pressing MULTI-CONTROL.

42 En

Page 42
Image 42
Pioneer DEH-P610BT operation manual Selecting the language, Setting the clock