Pioneer DEH-P610BT Selecting teams for Game Alert, Switching the Game Alert on or off

Section

12Available accessories

!To use this function, Pioneer SIRIUS bus in- terface (e.g. CD-SB10) is required.

!To use this function, SIRIUS plug-and-play unit with Game Alert Function is required.

!For details, refer to SIRIUS plug-and-play unit’s manuals.

!You can also operate this function when SIR-PNR2 is connected to this unit.

Selecting teams for Game Alert

1Display the function selection menu. Refer to Introduction of advanced operations on the previous page.

2Use MULTI-CONTROL to select

TEAM SETTING in the function menu.

3Push MULTI-CONTROL left or right to select a desired league.

League names are switched in the display.

4Push MULTI-CONTROL up or down to select a desired team.

Teams in the selected category are switched in the display.

5Press MULTI-CONTROL to store the se- lected team in memory.

The game alert function will start on that

team.

# To turn the Game Alert off of the selected

team, press MULTI-CONTROL again.

# When you have already made 12 team selec- tions, FULL is displayed and additional team se- lection is not possible. In this case, first delete the team selection and then try again.

6Repeat these steps for selecting other teams.

Up to 12 teams can be selected.

Switching the Game Alert on or off

Once you made team selections, you need to turn the Game Alert function on.

!The Game Alert function is on at the default setting.

1Display the function selection menu. Refer to Introduction of advanced operations on the previous page.

2Use MULTI-CONTROL to select G-ALERT in the function menu.

3Press MULTI-CONTROL to turn the Game Alert on.

The Game Alert function is now on.

# To turn the Game Alert function off, press MULTI-CONTROL again.

When the game of the selected team starts

When a game of the selected team is about to start (or is currently playing) on a different sta- tion, G-ALERT is displayed. Press and hold MULTI-CONTROL to switch to that station, and you can listen to that game.

!If you do not operate the function within about 10 seconds, the display is automati- cally returned.

Displaying game information

If games of your selected teams are currently playing, you can display information of the games and tune to the broadcast channel. You can display information of the games while enjoying the sound from currently tun- ing station. You can also tune to the broadcast channel when you wish to.

1Display the function selection menu. Refer to Introduction of advanced operations on the previous page.

2Use MULTI-CONTROL to select

GAME INFO in the function menu.

The game information of your selected team is displayed.

3Push MULTI-CONTROL up or down to select a game.

The game is displayed, followed by more de- tailed game information.

!Game score will be updated automatically.

52 En