![](/images/new-backgrounds/1221371/22137197x1.webp)
| Section |
Available accessories | 12 |
|
|
XM tuner
Listening to XM Satellite Radio
You can use this unit to control an XM satellite digital tuner
For details concerning operation, refer to the XM tuner’s operation manuals. This section provides information on XM operations with this unit which differs from that described in the XM tuner’s operation manual.
!With this unit, you can operate two addi- tional functions: XM channel direct selec- tion and preset channel list.
%Selecting an XM band
Press BAND/ESC.
# Band can be selected from XM1, XM2 or XM3.
%Selecting a channel
Push
#If you push and hold
#You can also perform tuning from a desired channel category. (Refer to Selecting a channel in the channel category on the next page.)
Switching the XM display
%Press DISP/SCRL to switch the XM dis- play.
Selecting an XM channel directly
You can select an XM channel directly by en- tering the desired channel number.
1Press DIRECT on the remote control. Channel number input display appears.
2Use 0 to 9 on the remote control to
input the desired channel number.
# To cancel the input numbers, press CLEAR on the remote control.
3Press DIRECT on the remote control. The XM channel of entered number is selected.
Note
After entering the number input mode, if you do not perform an operation within about eight sec- onds, the mode is automatically canceled.
Storing and recalling broadcast stations
You can easily store up to six broadcast sta- tions for later recall.
!Six stations for each band can be stored in memory.
1 Press /LIST.
Preset screen is displayed.
2Use
Turn to change the preset number. Press and hold to store.
The XM preset number you have selected will flash and then remain lit. The selected station has been stored in memory.
3Use
Turn to change the station; press to select.
# You can also change the station by pushing
# If you do not operate the list within about 30 seconds, the display is automatically returned to the ordinary display.
Selecting the XM channel select mode
You have two methods for selecting a channel: by number and by category. When selecting by number, channels in any category can be selected. Select by category to narrow your search down to only channels in a particular category.
English
En 49