10-26 Administration Guide
1.Select Profile Name and enter a name for this connection profile. It can be any name you wish. For example: the name of your ISP.
2.Toggle the Profile Enabled value to Yes or No. The default is Yes.
3.Select IP Profile Parameters and press Return. The IP Profile Parameters screen appears.
IP Profile Parameters
Address Translation Enabled: | Yes |
IP Addressing... | Numbered |
NAT Map List... |
|
NAT Server List... | |
Local WAN IP Address: | 0.0.0.0 |
Local WAN IP Mask: | 0.0.0.0 |
Remote IP Address: | 0.0.0.0 |
Remote IP Mask: | 0.0.0.0 |
Filter Set... |
|
Remove Filter Set |
|
RIP Profile Options...
Configure IP requirements for a remote network connection here.
4.Toggle or enter any IP parameters you require and return to the Add Connection Profile screen by pressing Escape. For more information on NAT, see “Multiple Network Address Translation,” beginning on
page
The Local WAN IP Address is displayed for numbered or NAT profiles. The Local WAN IP Mask is displayed for numbered profiles. The Remote IP Address and Remote IP Mask are displayed for unnumbered profiles.
