Netopia 4752 manual Static routes

10-6 Administration Guide

If you have configured multiple Ethernet IP subnets, the IP Setup screen changes slightly:

IP Setup
Subnet Configuration...
Default IP Gateway:	192.128.117.163
Primary Domain Name Server:	0.0.0.0
Secondary Domain Name Server:	0.0.0.0
Domain Name:
Receive RIP...	Both
Transmit RIP...	v2 (multicast)
Static Routes...	IP Address Serving...
Network Address Translation (NAT)...

Set up the basic IP attributes of your Netopia in this screen.

The IP address and Subnet mask items are hidden, and the Define Additional Subnets... item becomes Subnet Configuration.... If you select Subnet Configuration, you will return to the IP Subnets screen that allows you to define IP addresses and masks for additional Ethernet IP subnets.

Static routes

Static routes are IP routes that are maintained manually. Each static route acts as a pointer that tells the Netopia 4752 how to reach a particular network. However, static routes are used only if they appear in the IP routing table, which contains all of the routes used by the Netopia 4752 (see “IP Routing Table” on page 14-9).

Static routes are helpful in situations where a route to a network must be used and other means of finding the route are unavailable. For example, static routes are useful when you cannot rely on RIP.

To go to the Static Routes screen, select Static Routes in the IP Setup screen and press Return.