Netopia 4752 manual Subnets and subnet masks

Models: 4752

1 284
Download 284 pages 8.12 Kb
Page 246
Image 246

C-2 Administration Guide

IP addresses are maintained and assigned by the InterNIC, a quasi-governmental organization now increasingly under the auspices of private industry.

Note: It’s very common for an organization to obtain an IP address from a third party, usually an Internet service provider (ISP). ISPs usually issue an IP address when they are contracted to provide Internet access services.

The InterNIC (the NIC stands for Network Information Center) divides IP addresses into several classes. Classes A, B, and C are assigned to organizations that request addresses. In Class A networks, the first byte of an IP address is reserved for the network portion of the address. Class B networks reserve the first two bytes of an IP address for the network address. Class C networks reserve the first three bytes of an IP address for the network address. In all cases, a network manager can decide to use subnetting to assign even more bits to the network portion of the IP address, but never less than the class requires. The following section gives more information on subnetting.

Class A networks have a small number of possible network numbers, but a large number of possible host numbers. Conversely, Class C networks have a small number of possible host numbers, but a large number of possible network numbers. Thus, the InterNIC assigns Class A addresses to large organizations that have very large numbers of IP hosts, while smaller organizations, with fewer hosts, get Class B or Class C addresses. You can tell the various classes apart by the value of the first (or high-order) byte. Class A networks use values from 1 to 127, Class B networks use values from 128 to 191, and Class C networks use values from 192 to 223. The following table summarizes some of the differences between Class A, B, and C networks.

 

 

Number of

Number of

 

 

Class

First byte

networks

hosts

Format of address

Example

possible per

possible per

(without subnetting)

 

 

 

 

 

class

network

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A

1–127

127

16,777,214

net.host.host.host

97.3.14.250

 

 

 

 

 

 

B

128–191

16,384

65,534

net.net.host.host

140.100.10.11

 

 

 

 

 

 

C

192–223

2,097,152

254

net.net.net.host

197.204.13.7

 

 

 

 

 

 

Subnets and subnet masks

Often an entire organization is assigned only one IP network number. If the organization has several IP networks connected together with IP routers, the network manager can use subnetting to distinguish between these networks, even though they all use the same network number. Each physical network becomes a subnet with a unique subnet number.

Subnet numbers appear within IP addresses, along with network numbers and host numbers. Since an IP address is always 32 bits long, using subnet numbers means either the network number or the host numbers must use fewer bits in order to leave room for the subnet numbers. Since the InterNIC assigns the network number proper, it should not change, so the subnet numbers must be created out of bits that would otherwise be part of the host numbers.

Page 246
Image 246
Netopia 4752 manual Subnets and subnet masks

4752 specifications

The Netopia 4752 is a versatile networking device that serves as a digital subscriber line (DSL) modem and router, designed to provide high-speed internet connectivity and advanced networking capabilities for home and small office environments. This device is notable for its reliability and ease of use, making it a popular choice among users looking for seamless internet access.

One of the main features of the Netopia 4752 is its support for various DSL technologies, including ADSL and ADSL2+. This compatibility ensures that users can achieve optimal bandwidth and speed, even on legacy DSL lines. The modem’s capability to handle downstream speeds of up to 24 Mbps allows for smooth streaming, gaming, and browsing experiences.

Equipped with a robust built-in router, the Netopia 4752 offers multiple Ethernet ports for direct wired connections, accommodating multiple devices simultaneously. This feature is especially beneficial in environments where multiple users need to access the internet without latency. Additionally, the device supports wireless connectivity, enabling users to connect their laptops, smartphones, and other Wi-Fi-enabled devices effortlessly.

Security is a crucial aspect of the Netopia 4752’s functionality. The device incorporates a built-in firewall and supports various security protocols, including WPA and WPA2, ensuring that users’ data remains protected from unauthorized access. The user-friendly web-based interface facilitates easy configuration of security settings, making it accessible even for those with limited technical knowledge.

The Netopia 4752 also features advanced Quality of Service (QoS) settings that allow users to prioritize bandwidth for specific applications or devices. This capability is crucial for households or offices that demand high performance for video conferencing, streaming services, or online gaming.

In terms of characteristics, the Netopia 4752 boasts a compact form factor, making it easy to integrate into any workspace without occupying much space. Its durable design ensures longevity, providing reliable service over time.

Overall, the Netopia 4752 stands out as a dependable DSL modem and router solution, with its high-speed internet capabilities, security features, and flexible connectivity options suitable for both home and small office users who require efficient and effective internet access.