Conﬁguring TCP/IP on Windows-based Computers

Conﬁguring TCP/IP on a Windows computer requires the following:

■An Ethernet card (also known as a network adapter)

■The TCP/IP protocol must be “bound” to the adapter or card

Dynamic conﬁguration (recommended)

To conﬁgure your PC for dynamic addressing do the following:

1.Go to the Start Menu/Settings/Control Panels and double click the Network icon. From the Network components list, select the

2.Select TCP/IP-->Your Network Card. Then select

Properties. In the TCP/IP Properties screen, select the IP Address tab. Click “Obtain an IP Address automatically”.

3.Click on the DNS Conﬁguration tab. Click Disable DNS. DNS will be assigned by the router with DHCP.

4.Click OK in this window and the next window. When prompted, reboot the computer.

Note: You can also use these instructions to conﬁgure other computers on your network to accept IP addresses served by the Netopia 4752.