Network Instruments WAN Probe Kit Actions, Triggers

Check the alarms you wish to set, then click the Triggers tab to set the criteria by which the alarms will be triggered:

Note that most WAN alarms can be set on the DTE or DCE side or both; note also that the Committed Information Rate displayed is that which you set in Discover Network Names mode. See “Setting the Committed Information Rate (CIR) for a DLCI” on page 30. The Actions tab lets you define actions to launch if an alarm is triggered. You can log messages, send email, or even send a pager alarm.

Running Observer Software with the WAN Probe 37