IMPORTANT: Operating heater where impurities in the air exist may create odors. Cleaning supplies, paint, paint remover, cigarette smoke, cements and glues, new carpet or textiles, etc. create fumes. These fumes may mix with combustion air and create odors.
|
| OBSERVED | POSSIBLE |
|
|
|
| |
|
| PROBLEM | CAUSE | SOLUTION | ||||
|
| Heater produces a clinking/ | 1. | Metal expands while heating | 1. | This is common with most | ||
|
| ticking noise just after burner is lit |
| or contracts while cooling |
| heaters. If noise is excessive, | ||
|
| or shut off |
|
|
| contact a qualified service | ||
|
|
|
|
|
| person. | ||
|
| Heater produces unwanted odors | 1. | Heater burning vapors from | 1. | Ventilate room. Stop using |
| |
|
|
|
| paint, hairspray, glues, etc. |
| odor causing products while | ||
|
|
|
| (See Important above) |
| heater is running. | ||
|
|
| 2. | Low fuel supply | 2. | Refill supply tank | ||
|
|
| 3. | Gas leak (See WARNING | 3. | Locate and control all leaks. | ||
|
|
|
| above) |
| (See Checking Gas | ||
|
|
|
|
|
| Connections) | ||
|
|
|
|
|
|
|
| |
|
| Heater shuts off in use | 1. | Not enough fresh air is | 1. | Open window/door for | ||
|
| (ODS operates) |
| available |
| ventilation | ||
|
|
| 2. | Low line pressure | 2. | Contact local propane co. | ||
|
|
| 3. | ODS/Pilot is partially clogged | 3. | Clean ODS/Pilot | ||
|
|
|
|
|
|
|
| |
|
| Gas odor even when control knob | 1. | Gas leak (See WARNING | 1. | Locate and correct all leaks | ||
|
| is in OFF position |
| above). |
| (see Checking Gas | ||
|
|
|
|
|
| Connections) | ||
|
|
| 2. | Control valve defect | 2. | Replace control valve | ||
|
| Gas odor during combustion | 1. | Foreign matter between | 1. | Remove foreign matter from | ||
|
|
|
| control valve and burner |
| gas tubing | ||
|
|
| 2. | Gas leak (See WARNING | 2. | Locate and correct all leaks | ||
|
|
|
| above). |
| (see Checking Gas | ||
|
|
|
|
|
| Connections) | ||
|
|
|
| 43 |
|
|
|
|
