New Buck Corporation CR8T manual Important Safeguards, Cleaning, other part of the heater

Models: CR8T

1 39
Download 39 pages 49.98 Kb
Page 29
Image 29
IMPORTANT SAFEGUARDS

IMPORTANT SAFEGUARDS

Although your gas logs are very realistic in appearance, it is not a real burning fireplace and must not be used for burning solid fuel.

To avoid irreparable damage to the heater or personal injury, matches, paper, garbage, or any other material must not be placed or thrown on top of the logs or into the flames.

To avoid personal injury, do not touch hot surfaces when the heater is operating. Close supervision is necessary when the heater is being operated near children.

CLEANING

All cleaning should be carried out when the heater is cold. Only limited cleaning will be required under normal use. Dusting the front of the base, the top of the piezo cover, or the control knob panel may be required occasionally. Do not use any cleaning fluids to clean the logs or any

other part of the heater.

If the flames show any unusual shapes or behavior, or if the burners fail to ignite properly, then the burner holes may require cleaning. If this occurs, it is preferable to contact your nearest dealer to get your heater serviced.

Alternatively, the heater can be cleaned by removing the top, front, and rear logs. Handle the logs gently so as not to damage them. Always lift each log by holding it carefully at each end. Use a vacuum cleaner to carefully remove dust and loose particles from the base, logs, and from around the burners.

25

Page 29
Image 29
New Buck Corporation CR8T manual Important Safeguards, Cleaning, other part of the heater