OBSERVED |
| POSSIBLE |
|
PROBLEM |
| CAUSE | SOLUTION |
|
|
| |
When igniter button is pressed, | 1. Igniter electrode positioned | 1. Replace igniter | |
there is no spark at ODS/PILOT |
| incorrectly |
|
| 2. | Igniter electrode broken | 2. Replace igniter |
| 3. | Igniter electrode not | 3. Reconnect igniter cable |
|
| connected to igniter cable |
|
| 4. | Igniter cable pinched or wet | 4. Free igniter cable if pinched |
|
|
| by any metal or tubing. Keep |
|
|
| igniter cable dry. |
| 5. | Broken igniter cable | 5. Replace piezo igniter cable. |
| 6. | Bad piezo igniter | 6. Replace igniter cable |
OBSERVED | POSSIBLE | SOLUTION | |
PROBLEM | CAUSE |
| |
When igniter button is pressed, 1. Gas supply turned off or
there is spark at ODS/PILOT but | manual shutoff valve is |
no ignition. | closed |
2. | Control knob not in “PILOT” |
| position |
3. | Control knob not pressed in |
| while in “PILOT” position |
1.Turn on gas supply or open manual shutoff valve
2.Turn control knob to “PILOT” position
3.Press in control knob while in “PILOT” position.
26
